Xone:DB2 - Instruction: Microphone / Line Channel
ОписаниеXone:DB2 - Instruction: Microphone / Line Channel
MICROPHONE INPUT CONNECTOR is a Balanced XLR for connecting a microphone. Use a good quality low impedance dynamic mic designed for vocals.
MIC / LINE SELECTOR SWITCH selects either the MONO Microphone or STEREO Line inputs.
The LINE INPUT CONNECTOR has Dual RCA sockets for connecting an external line level source.
GAIN CONTROL adjusts the input sensitivity of the Mic/Line channel to compensate for different source signal levels.
The MIC equaliser provides a tool to adjust the tonal quality of the sound. Start with the EQ controls set to their mid (flat) position, and then adjust to achieve the desired sound.
CHANNEL PEAK LED illuminates if the channel signal is within 3dB of clipping. If the Peak LED continuously lights, turn the Gain control down.
CHANNEL CUE SWITCH allows you to listen to the channel pre-fade signal in the headphones and view its level on the main meters.
CHANNEL LEVEL CONTROL sets the level of the channel signal in the main mix.
CHANNEL ON SWITCH turns the channel On or Off.
XFADE / FX SWITCH selects where the channel output will be routed:
So (Centre) is MIX - this Routes the signal directly to the mix.
Left is X -- which Routes the signal to the input of FX-X or to X xfader.
Right is Y -- which Routes the signal to the input of FX-Y or to Y xfader.
Категории:Видеоканалы / Allen&Heath
Оборудование в этом видео
Цифровой микшер для диджеинга